≡ Menu


Servicing North Shore Auckland for decades!
(09) 489 2080


Roof Restoration

Roof Wash > Roof Repair > 3 Coat Paint Application

Roofcare specialise in the restoration of concrete tile, stone chip and iron roofs. We will wash, perform any necessary repair work, and either paint or coat your roof so that it is as good or better than new – we’ll do everything we can to try and minimize a re-roof.

The Roofcare Coating System uses specially formulated high solids, elastomeric acrylic based membrane coatings, containing moss and mould inhibitors and UV absorbers that maximise weather protection, flexibility, durability and general appearance. We have many modern colours to choose from.

The coating process is a three coat paint application by airless spray following any cleaning and repairs your roof might require.

The first application of paint or color coating is a sealer, the second coat is a high build formulation based on water borne acrylic copolymer, and the third coat is a gloss finish coat based on pure acrylic water borne polymer.

Roofcare’s protective paint system carries a 10 year guarantee

To book a quote, click here

Click here for colour options

Concrete tile roofs

Here’s how we treat them…

We treat your roof with Safe n Simple™ to remove moss, mould and lichen. Then we wash the roof, clean the gutters and remove all debris. We replace leaking damaged and cracked tiles. We completely re-point ridge and hip cappings with Selleys Point Works and re-bed loose ridge caps. Then we apply our protective colour coating system: two coats of high density waterproofing cover coat, finished with one coat of colour glaze.

Metal stone chip roofs

Here’s how we treat them…

We treat your roof with Safe n Simple™ to remove moss, mould and lichen. Then we wash the roof, clean the gutters and remove all debris. We carefully repair or replace damaged and cracked tiles. Surface rust is treated with a rust neutralizer and coated with an anti-corrosive primer. We replace loose nails. Then we apply our protective colour coating system: one coat of stone chip tile sealer, one coat of high density highbuild cover coat with chip, finished with one coat of low sheen colour glaze.

Iron roofs

Here’s how we treat them…

We treat your roof with Safe n Simple™ to remove moss, mould and lichen. We then water-blast your roof to remove flaking paint, dirt and moss. Then we clean the gutters and remove all debris. Iron is treated with a rust neutraliser and anti-corrosive prime guard. Finally we apply our protective colour coating system: one coat of acrylic primer guard to bare galvanised areas, one coat of high density cover coat, finished with one coat of high density colour glaze.

Contact us for a roof check or quote